Skip to content
FREE DELIVERY FOR ORDERS OVER €150 IN FINLAND / ORDERS BEFORE 2 PM WE TRY TO SHIP THE SAME DAY
FREE DELIVERY FOR ORDERS OVER €150 IN FINLAND / ORDERS BEFORE 2 PM WE TRY TO SHIP ON THE DAY
Patron High-Pressure Sodium Lamp SON-E E27 110 W, 9600 lm – 2000 K, mercury lamp replacement, 72 x 165 mm
Patron High-Pressure Sodium Lamp SON-E E27 110 W, 9600 lm – 2000 K, mercury lamp replacement, 72 x 165 mm

Patron High-Pressure Sodium Lamp SON-E E27 110 W, 9600 lm – 2000 K, mercury lamp replacement, 72 x 165 mm

SKU 5941019829907
€19.90 - €19.90
€19.90
€19.90 - €19.90
€19.90

includes VAT 25.5% Shipping costs are calculated at checkout.

Availability:
Tilaustuote
TilaustuoteToimitusaika about 2 weeks

This high-pressure sodium lamp is designed to replace old mercury vapour lamps: it operates on a mercury vapour lamp ballast without a separate igniter, so no changes to the luminaire are required. The result is significantly more light at lower power – 9600 lumens at 110 watts – and a service life that is more than double that of a mercury vapour lamp. The light is yellowish, as is typical for a sodium lamp.

E27 base · 110 W · 9600 lm · 84 lm/W · 2000 K · Ra 20–39 · frosted oval 72 x 165 mm · no external igniter

Special-order product: delivery time approximately 2 weeks.

Technical specifications

  • Lamp type: high-pressure sodium lamp, replaces mercury vapour lamp
  • Base: E27
  • Power: 110 W
  • Luminous flux: 9600 lm
  • Luminous efficacy: 84 lm/W
  • Colour temperature: 2000 K (yellowish)
  • Colour rendering index: Ra 20–39
  • Control gear: external ballast, no external igniter
  • Supply voltage: 220–240 V via ballast
  • Average rated service life: 24,000 h
  • Weighted energy consumption: 121 kWh / 1000 h
  • Model: frosted
  • Shape: oval, 72 x 165 mm
  • Manufacturer: Patron
  • Product code: 5941019829907
Compatibility and installation

The lamp is intended to replace a 125 W mercury vapour lamp in a luminaire equipped with a mercury vapour lamp ballast. Since the lamp lights up without a separate igniter, the old luminaire does not need to be modified. The lamp is not intended for use in a standard sodium luminaire equipped with its own igniter.

The colour of the light changes from bluish-white to yellowish when replaced, and colour rendering is poor. The lamp reaches full light in a few minutes and will only restart after it has cooled down. Take the used lamp intact to an electrical and electronic waste collection point.

  1. Check the old lamp for the marking HPL, HQL or HSL and a power rating of 125 W.
  2. Ensure that the luminaire does not have a separate igniter.
  3. Switch off the power and allow the old lamp to cool down completely.
  4. Screw the new lamp securely into the E27 base and wait a few minutes for it to reach full light.

Electrical modifications must be carried out by a qualified electrician. See also Patron HPL 125 W and sodium lamps.

Power: 110W
Color temperature: 2000K
Opinion: E27

Onko kysyttävää tästä tuotteesta?

Kerro, mihin tuote tulee, tai lähetä kuva kohteesta. Autamme valitsemaan oikean ennen kuin tilaat.

Kysy WhatsAppissa tai soita 050 544 3557

Vastaamme arkisin klo 8–16, viimeistään seuraavana arkipäivänä.

Delivery

We ship your order from our warehouse in Jyväskylä. Orders placed before 2 PM are usually shipped on the same day. Free delivery within Finland for orders over €150.

Warranty

Products purchased through Lumenled come with a manufacturer's warranty, supported by Lumenled in cooperation with the importer. You can find detailed warranty terms here: Warranty terms of our partners.

Request an offer
tai Pyydä tarjous WhatsAppissa

Usein kysytyt kysymykset

Can this bulb be put directly in place of a mercury-vapor lamp?

Yes, if the luminaire has a 125 W mercury lamp ballast. The lamp is designed specifically for this: it lights up without a separate igniter and works with a mercury lamp ballast, so no modifications to the luminaire are necessary.

Check the marking on the old lamp before ordering. If the luminaire has an HWL mixed-lamp, it does not have a ballast, and this lamp will not work in it.

How much more light does a sodium lamp produce than a mercury lamp?

Clearly more. A 125 W mercury lamp produces about 6200 lumens, while this sodium lamp produces 9600 lumens – about one and a half times as much light with less power. In addition, the rated operating life is 24,000 hours, compared to about 10,000 hours for the mercury lamp.

After the replacement, the yard light will therefore illuminate better, consume less energy, and the lamp will need to be replaced less often.

Why is sodium lamp light yellow?

High-pressure sodium lamp light is produced by sodium vapor, whose radiation is concentrated in the yellow-orange spectrum. The color temperature is around 2000 K and color rendering is poor, so colors are difficult to distinguish in its light.

In streets, yards, and parking areas, this is generally not important, and yellow light attracts fewer insects. If you need white light, choose a mercury vapor or LED solution.

Does the lamp fit a standard sodium fixture?

It is not intended for that. A standard sodium luminaire has a separate igniter that sends a high-voltage pulse to the lamp. This lamp is designed to operate without an igniter using a mercury-vapor lamp ballast.

For a standard sodium luminaire, choose a sodium lamp designed for it. You can find options in the sodium lamps category.