Skip to content
FREE DELIVERY FOR ORDERS OVER €150 IN FINLAND / ORDERS BEFORE 2 PM WE TRY TO SHIP THE SAME DAY
FREE DELIVERY FOR ORDERS OVER €150 IN FINLAND / ORDERS BEFORE 2 PM WE TRY TO SHIP ON THE DAY
LED butterfly lamp GR10q 4-pin 8W 1000lm 3500K opal – Ø137×27mm replaces 16W butterfly fluorescent lamp
LED butterfly lamp GR10q 4-pin 8W 1000lm 3500K opal – Ø137×27mm replaces 16W butterfly fluorescent lamp
LED butterfly lamp GR10q 4-pin 8W 1000lm 3500K opal – Ø137×27mm replaces 16W butterfly fluorescent lamp
LED butterfly lamp GR10q 4-pin 8W 1000lm 3500K opal – Ø137×27mm replaces 16W butterfly fluorescent lamp

LED butterfly lamp GR10q 4-pin 8W 1000lm 3500K opal – Ø137×27mm replaces 16W butterfly fluorescent lamp

SKU 146937
€30.10 - €30.10
€30.10
€30.10 - €30.10
€30.10

includes VAT 25.5% Shipping costs are calculated at checkout.

Availability:
Tilaustuote
TilaustuoteToimitusaika about 2 weeks.

Special-order product

Delivery time approximately 2 weeks

The LED butterfly bulb (TC-DDEL) replaces the traditional 16W GR10q 4-pin butterfly bulb with half the power. Works with both direct 230V mains voltage and an old ballast — an LED starter is included with the bulb. Suitable for ceiling lights and enclosures with a GR10q base. 3500K neutral white light (75% of daylight).

Product code 146937 · 1000 lm · 3500K · 130° beam angle · LED starter included · direct 230V or ballast

Technical specifications

  • Base: GR10q (4-pin butterfly base)
  • Power: 8W
  • Luminous flux: 1000 lm
  • Efficiency: 125 lm/W
  • Colour temperature: 3500K (neutral white)
  • Colour rendering index (CRI): 80–89
  • Nominal voltage: 220–240V
  • Beam angle: 130°
  • Finish: opal
  • Dimensions: Ø137 × 27 mm
  • LED starter: included in the package
Compatibility and installation

Replaces: 16W GR10q 4-pin butterfly bulb (TC-DDEL/TC-T). Two installation methods:

  • With the old ballast: if the luminaire has a working electronic or magnetic ballast, install the LED butterfly bulb and replace the starter with the LED starter included in the package. The ballast remains in place.
  • Directly 230V: if you want to remove the ballast completely, bypass it and connect 230V directly to the GR10q base. Requires a wiring change and an electrician.

Dimming: this model is not dimmable.

Installation checklist:

  1. Check that the old bulb's base is GR10q (4-pin butterfly base) — not a 2D base.
  2. Replace the traditional starter with the LED starter included in the package.
  3. If you want to bypass the ballast, leave the wiring change to an electrician.
  4. Use in dry indoor spaces — IP20 protection.

See our partners' warranty terms.

Power: 8 weeks

Onko kysyttävää tästä tuotteesta?

Kerro, mihin tuote tulee, tai lähetä kuva kohteesta. Autamme valitsemaan oikean ennen kuin tilaat.

Kysy WhatsAppissa tai soita 050 544 3557

Vastaamme arkisin klo 8–16, viimeistään seuraavana arkipäivänä.

Delivery

We ship your order from our warehouse in Jyväskylä. Orders placed before 2 PM are usually shipped on the same day. Free delivery within Finland for orders over €150.

Warranty

Products purchased through Lumenled come with a manufacturer's warranty, supported by Lumenled in cooperation with the importer. You can find detailed warranty terms here: Warranty terms of our partners.

Request an offer
tai Pyydä tarjous WhatsAppissa

Usein kysytyt kysymykset

Does this replace a 16W GR10q butterfly fluorescent lamp?

Yes. The 8W LED butterfly lamp produces a luminous flux of 1000 lm — equivalent to a 16W traditional GR10q 4-pin butterfly fluorescent lamp. The savings are approximately 50% in energy, and the lifespan of the LED is 3–5 times longer (up to 30,000 h vs. 10,000 h for a fluorescent lamp).

Is the included LED starter mandatory?

Yes, if you install the lamp with the old ballast. A traditional starter provides the fluorescent lamp with a high-voltage ignition pulse that an LED lamp cannot withstand — this would burn out the LED. The LED starter bypasses the ignition pulse and allows the lamp to operate safely with the ballast. Always install the LED starter before the LED plug-in lamp.

Can I bypass the choke entirely?

Yes. The lamp works both with a ballast and directly on 230V mains voltage. Bypassing the ballast requires rewiring and an electrician — do not attempt to do it yourself. A bypassed system is more energy-efficient in the long run, as ballast losses are eliminated.

Is the lamp dimmable?

No. This model is not dimmable — do not use with a dimmer. Most GR10q butterfly lamps (both fluorescent and LED) are not dimmable, as the ballast system and traditional control electronics do not reliably support dimming.

  • 5 stars: 3 (100%)
  • 4 stars: 0 (0%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
S
Sami Salo
Asiakaspalvelu toimi hienosti ja tuote tuli vuorokauden sisällä

Asiakaspalvelu toimi hienosti ja tuote tuli vuorokauden sisällä. :D

N
Nimetön

Palvelu oli erittäin hyvää ja ystävällistä; varmistettiin puhelimitse ennen toimitusta, että tilattu harvinaisempi lamppu sopii valaisimeen. Lamppu on juuri oikeanlainen.

N
Nimetön
Ystävällinen asiantuntija otti yhteyttä

Ystävällinen asiantuntija otti yhteyttä tilaukseni jälkeen ja varmisti, että tuote sopii korvaamaan Lumiance Giotto 235 -valaisimessa olleen 16w-perhosloisteputken ja sytyttimen. Toimitus oli myös todella nopea, ja asennus onnistui vastaavasti, kuin loisteputkella. Syttyy välittömästi katkaisimesta ja lampussa on miellyttävä värilämpötila.