{"product_id":"12w-18-35v-cc-led-dim-350ma-109x40x22mm-triac-himmennettava-led-liitantalaite","title":"LED driver 12W 18–35V 350mA TRIAC dimmable – 109x40x22 mm constant current","description":"\u003cp\u003eThe LED driver is a dimmable constant current power supply that provides a constant current of 350 mA regardless of load fluctuations. The output voltage is 18–35 V and the power is 12 W, making the device suitable for LED luminaires and circuits that require a fixed current to function correctly. Dimming can be achieved with both leading-edge and trailing-edge dimmers (TRIAC and sine wave cutting).\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eConstant current power supply, 350 mA. Output voltage 18–35 V. For indoor use. Dimmable with TRIAC leading-edge and trailing-edge dimmers.\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: LED driver (constant current power supply, dimmable)\u003c\/li\u003e\n\u003cli\u003ePower: 12 W (maximum)\u003c\/li\u003e\n\u003cli\u003eInput voltage: 220–240 V AC\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 18–35 V DC\u003c\/li\u003e\n\u003cli\u003eOutput current: 350 mA (constant)\u003c\/li\u003e\n\u003cli\u003eDimming methods: TRIAC leading edge, TRIAC trailing edge, sine wave cutting\u003c\/li\u003e\n\u003cli\u003eProtection class: for indoor use (not IP-rated for outdoor installation)\u003c\/li\u003e\n\u003cli\u003eCasing: plastic casing\u003c\/li\u003e\n\u003cli\u003eDimensions: 109 × 40 × 22 mm\u003c\/li\u003e\n\u003cli\u003eProduct code: 146899\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdetails\u003e\n\u003csummary\u003e\u003cstrong\u003eCompatibility and installation\u003c\/strong\u003e\u003c\/summary\u003e\n\u003cp\u003e\u003cstrong\u003eConstant current power supply — fixed 350 mA current\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is a constant current (CC) power supply, which always provides the same 350 mA current to the load regardless of voltage fluctuations. A constant current power supply is suitable for LED luminaires designed for a fixed current — this prevents overloading of the LEDs and extends their lifespan.\u003c\/p\u003e\n\u003cp\u003eThe suitable load is an LED luminaire or LED module with a voltage between 18–35 V and a current consumption of 350 mA. Check the technical specifications of the LED luminaire before installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimming — TRIAC leading edge and trailing edge\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver supports dimming with the following technologies:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRIAC leading-edge dimming\u003c\/strong\u003e — traditional mains voltage dimming, the most common type of dimmer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTRIAC trailing-edge dimming\u003c\/strong\u003e — more modern, smoother dimming\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSine wave cutting\u003c\/strong\u003e — phase-cut dimming\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe device DOES NOT support: 0–10 V, 1–10 V, DALI, DMX, DSI, Zigbee, RF dimming, or Touch and Dim control. If you are using any of these control standards, select a suitable driver separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor indoor use\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe driver is not IP-rated for outdoor use, so it should be installed indoors or in a separately protected outdoor enclosure. Protect the device from moisture and dust.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eElectrical connections may only be made by a qualified electrician in accordance with current regulations. The compact size of the device (109 × 40 × 22 mm) facilitates placement, for example, in a suspended ceiling or inside a cable duct.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation checklist\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eCheck that the voltage of the LED load is 18–35 V and the current is 350 mA\u003c\/li\u003e\n\u003cli\u003eCheck that the dimmer used is a TRIAC or sine wave cutting type\u003c\/li\u003e\n\u003cli\u003eTurn off the power at the main switch\u003c\/li\u003e\n\u003cli\u003eHave an electrician connect the driver to the mains voltage and the LED load\u003c\/li\u003e\n\u003cli\u003eInstall the device in a protected location where it is not exposed to moisture\u003c\/li\u003e\n\u003cli\u003eTurn on the power and test the dimming\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/details\u003e","brand":"Lumenled Oy","offers":[{"title":"Default Title","offer_id":57069802324312,"sku":"146899","price":25.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0577\/2171\/6917\/files\/146899.webp?v=1775647813","url":"https:\/\/www.lumenled.fi\/en\/products\/12w-18-35v-cc-led-dim-350ma-109x40x22mm-triac-himmennettava-led-liitantalaite","provider":"Lumenled Oy","version":"1.0","type":"link"}